How To Install A Window Stay

What Are Casement Windows?

Casement windows are fastened to a frame with ane or more hinges. They open up and shut like a door, either out or in. Historically, this type of window was popular before the introduction of sash windows, with many having leaded glass panes. Unlike contemporary casement windows, the original design opened inwards, oft with shutters on the outside of the window frame.

Early casement windows had matching hardware, commonly crafted in black iron, likely to have been forged past the local blacksmith. This changed in the Victorian era when brass was the favoured terminate.

Stays And Fasteners

Window latches and stays are used to prop open the window at sure angles depending on the holes called.

casement window stay, window casement stay

Casement fasteners go along the window shut securely in place and can likewise have the additional feature of a lock.

window latches and stays

How To Fit A Casement Window Stay (peg style)

Begin by unscrewing and removing the original stay used to hold open your window (if there is one present). Fill the holes left by the fixings with a woods filler.
After the filler is completely dry, sand the wood shine and paint, stain or varnish the newly filled surface area equally required.
After endmost the window, position the pins along the bottom of the window frame. The closer the fixing bracket of the stay against the opening edge of the casement, the more manoeuvrability you will have when opening and closing the window.
Fit the stay onto the pins. This will set the correct height for the stay. Using a pencil, dot the position of the stays fixing holes onto the casement frame.
Drill airplane pilot holes and screw the stay to the casement frame.
Close the window and ensure it is tight confronting the frame. Position the pins under the stay so that each line up with holes to both ends of the stay.
Motion the stay out of the way and pencil in the position of the fixing holes on the bottom of the window frame for each pin.
Drill pilot holes and screw the pins into the frame.
Make certain the stay fits over the pins and the window is shut tight.

window stays for wooden windows